Open a new canvas 650 by 650 flood filled in white
open frame9 and reduce the size by 50% then duplicate it and mirror. Bring the two frames together then merge.
Place frame 5 behind it reduce by 80% twice, Then click inside the frame and expand your selection by 20. Reduce paper 16
by 80%, invert selections and hit delete.
Place el 60 on the left side and reduce by 25%, Duplicate and move to the right place the netting behind frame 5
Place el 105 as your last layer . We are gonna use this as our mask. Reduce by 50% and move to the top left corner. Duplicate and mirror until you have all four sides covered then merge them as one.
Reduce el 97 by 50% and place behind the framed window to the right.
Reduce element 104 by 20% and place at the edge of the window frame on the left above the paper layer.
Resize el 26 by 35% twice and place to the top right side of the frame.
Reduce el 64 by 50% and using your pick tool setting I used to alter it was shear. move the curtain all the way to the right until the nodes reach the edge of your tag then move the top node to the right to move the top part of the curtain to the right edge of the frame. once done duplicate and mirror.
Adjust the placement on the left if needed. Now lower the opacity to 50- 45( i forgot my setting before i merged them :( ) Using your eraser tool erase the two middle panels that are paste the edges of the tag. This will be covered by elements. On the left eraser the part of the curtain covering the foliage. i left the right side alone.
On the right side of the tag I resized the following elements
31, 30 and 40 at 20%
88 at 15%
91 at 40%
98 at 30%
Working in the middle
mirror and resize el 24 at 50%
Place my tube and resized it by 50%
el 3 at 35%
el 96 at 40%
Working on the left side
All the bottles were reduced by 15%
all the flowers by 20%
el 63 by 10%
el 67 by 40%
Place el 85 and reduce by 505 to fill in any gaps between the frame and the elements
place el 12 and 1 reduce by 10 % on the top of the frame
I made my wordart using the fonts written above and copy/pasted paper 24 into the fat font.
Added some 3d effects cutout by duplicating the word then apply Effects #D effects then cutout.
On the original I used selection borders to make an outline. Selections- Select all- Modify- selection borders- click inside and setting to the number 2. Do not deselect Go to Adjust-Brightness/ contrast setting at 255, 100 click OK. then add some noise
the rest of the word art i used a gradient with two colors from the kit and some gradient glow.
Add your name artist URL, CR and your license number.
Animation 108 By Simone found HERE found at March 11 2012
Open a new canvas 650 by 650
Place el10 and el 6 under it. Click inside the large circle frame, expand the selections by 2, add a new raster layer and copy / paste paper 10 into selections, duplicate and change the blend to hard light and merge down.
Place paper1 in the last layer free rotate it 90 to the right and apply your mask.
Place el 22 above the masked layer towards the bottom, duplicate and mirror.
Place el 28 to the bottom left, duplicate mirror and flip. move it down to the right
Place el 23 above the large circle frame layer.
Resize el 24a by 50% sharpen and place on each side of the oval frame
Place your designed layer tube, duplicate and apply vivid skin tone filter twice using the EFFECTS- PHOTO EFFECTS-FILM AND FILTERS-VIVID SKIN TONE on the drop down menu.
Reduce el 28 by 805 and place to the bottom right behind the tube.
Reduce elements 14 and 30 by 25% and place on top of the carafe. Place the resized by 50% el 1 free rotated 90 to the left on the bottom.
Resize elements 19 and 11 by 25% sharpen and place on each side of the oval frame.
Place el 13 and erase the long stem.
Resize element 26 by 50% and place behind it twice.
Add your name , flood fill in the brass gradient add noise at 90% , contract by 1, add a new raster layer copy/ paste paper into selections then merge down, Add a drop shadow.
Place a branch element behind your name and reduce by 50%
Merge all the elements and tube above the oval frame layer. Close that layer then merge visible the rest of the tag.
Copy the bottom half of the tag to AS 21 times the amount of frames of you animation. Open your animation in As and reduce the size by 90%
Copy paste to the selected frames Then copy the top half of the tag to AS.
open a new canvas 650 by 650 flood filled in white
Using the fat font sized 250 pixels type out the word DARK in all caps.
Select all then modify- contract by 20,Add a new raster layer and copy/paste paper 32 into selections.
Duplicate and change the blend to Multiply. Merge down then change the opacity to 50.
Type the word FAIRY in the pixel font size 8 in white, align to center then convert to raster. Apply Mura Meister copies- Line Duplicate it then move it down and over. Repeat until you have four lines.
Activate the papered word dark, move the pixel wording to the desired location then invert selections and hit delete. Change the blend to overlay
Resize el71 by 50% and place behind the word dark to the right . Duplicate and move to the left.
Resize el 78 by 80 twice and place behind the wording
Reduce the candies by 25% elements 4 and 36. place the fruited candy in the front and the rest behind the letters.
Resize el 120 and 121 by 25% Free rotate the vine 50 to the right.
Working on the left resize the dragon, skull and candle by 25% then reduce the candle again by 50%
El 123 resize by 50 then 80.
Place the butterfly free rotate 20 to the right and sized down by 25%
Mirror el 116 and reduce by 20%
Place el 75 and reduce by 155 then again by 80% and move over one of the letters. Using your pick tool selection inside the gate and add a new raster layer copy/paste paper 35 into selection then place the mouse in front resized by 8%
Reduce el 69 by 50%and place to the right behind the wordart.
Place el 122 resized by 40% to the left .
Resize the cloud and brick flooring by 80%
Place paper 23 as the last layer and apply your mask.
Resize the moon by 35% and place behind the tree
Both tombstones by 15% and the Owl by 10%
Add some grass around resized at 30%
Now to add your tube. Apply Eye candy Impact Gradient glow setting at Dark Aura click the inside and outside button, then duplicate your tube and change the blend to Burn Opacity to 17.
Type out your name the color doesn't matter because we are gonna cover it in an element.
Apply the same dark Aura gradient glow then use your magic wand to click inside the name add the wings of the butterfly over the lettering , repeat paste is you need to as a new layer then invert selections and delete the excess. add a bevel and drop shadow.
Add your artist URL and CR.
To animate open your animation files in AS and count the frames. The file i used had 15 frames so i merge the tag Copy to AS 15 times.
The color on the animation was a little off so i used AS to recolor my animation i used.
How to achieve this in AS Select all in AS and click the Animation menu up top in the drop menu there is Replace color click that and a window will open up. Click the color block on top to use the dropper to select your " old color" then select your new color from your tag you just pasted to AS.
Repeat this function until you are satisfied with the color change.
Then reduce the size of your animation by 75% using the same menu but this time chose Resize animation on the menu and change the number to 75% .
Then copy and paste into existing frames
Repeat with the sparkle animation minus the sizing and recoloring